 |
| |
| RECOVERY PROCESS
The Recovery CD contains
a backup copy of the operating system. The procedure here shows
how to perform the recovery options.
|
| For
Windows 9x, ME, NT, 2000 |
|
| For
Windows XP Tablet PC Edition |
|
For
Windows 9x, ME, NT, 2000
 |
|
 |
|
LifeBook
with built-in CD-ROM
 |
 |
| 1) |
Power
up the LifeBook. |
2)
Press F12 to access boot sequence and select CD-ROM as boot
device.
OR
Press F2
to enter BIOS setup and change boot sequence to CD-ROM.
|
|
|
 |
| 3)
Insert the Recovery CD into the CD-ROM drive. |
4)
Select the recovery options. |
|
|
 |
|
 |
|
|
|
|
|
DESKPOWER
with built-in CD-ROM
 |
|
| 1) |
Power
up the DESKPOWER. |
2)
Press F12 to access boot sequence and select CD-ROM as boot
device.
 OR
Press
F2 to enter BIOS setup and change boot sequence to CD-ROM.
|
|
|
|
| 3)
Insert the Recovery CD into the CD-ROM drive. |
4)
Select the recovery options. |
|
|
|
|
|
|
 |
Note:
- Always backup
your important data before perform the recovery.
- Format and
recover option will erase your hard disk content including data
files. Choose Recover without format will not erase your hard
disk content.
- Do not perform
recovery unless the operating system encounter critical errors.
- You may use
Composite/Driver CD to reinstall device driver or pre-installed
program during or after the recovery process.
|
For
Windows XP
|
|
|
|
Reinstall
Windows XP from Windows mode
|
|
|
| 1)
|
Insert
the Recovery CD into the CD-ROM drive when you are in Window
desktop. |
2)
|
When
Recovery program starts, select Perform Recovery to reinstall
Windows XP. Follow on-screen instructions to proceed. |
| |
| Note:
For LifeBook B and P series, you may choose either to run
Recovery program from CD or Hard Disk second partition while
in Windows mode. |
|
|
|
|
|
|
|
|
|
|
Reinstall
Windows XP by booting from Recovery CD
(for all models except LifeBook B and
P series)
|
|
|
| 1) |
Power
up the system. |
2) |
Press F12 to access boot sequence and select CD-ROM as boot
device. |
|
|
|
| 3) |
Insert
the Recovery CD into the CD-ROM drive. |
4) |
Select the recovery options. |
| 5) |
Follow
on-screen instructions to proceed. |
| Warning:
|
If
you want to preserve your data or program files, do not
attempt to repartition (initialize) or reformat your hard
disk in Windows setup. |
|
|
|
|
|
|
|
|
Note:
- Always backup
your important data before performing the recovery.
- Format or
initialize hard disk will erase all your hard disk contents including
data files. Do not use this option unless absolutely neccessary.
- Do not perform
recovery or reinstallation unless the Windows operating system
encounter critical errors.
- You may use
Composite/Driver CD to reinstall device driver or pre-installed
program after the recovery process.
|
For
Windows XP Tablet PC Edition
|
|
|
|
Reinstall
Windows XP from Windows mode
|
|
|
| 1) |
Insert the Recovery CD into the CD-ROM
drive when you are in Window desktop. |
2) |
When Recovery program starts, select Perform
Recovery to reinstall Windows XP. Follow on-screen instructions
to proceed. |
| |
| Note: System without
CD-ROM, you may choose to run Recovery program from hard disk
second partition while in Windows mode. |
|
|
|
|
|
|
|
|
|
|
Reinstall Windows XP by booting from Recovery
CD
(for model with Tablet Dock)
|
|
| 2) |
Press F12
to access boot sequence and select CD-ROM as boot device. |
|
|
|
| 3) |
Insert
the Recovery CD (XP Tablet PC Edition CD1) into the CD-ROM drive. |
4) |
When "Press any key to boot from CD" appear, press
any key on the keyboard within 5 seconds. |
| 5)
|
Follow
on-screen instructions to proceed. |
| Warning:
|
If
you want to preserve your data or program files, do not
attempt to repartition (initialize) or reformat your hard
disk in Windows setup. |
|
|
|
|
|
|
|
|
Additional notes for system without a Tablet Dock:
If your system
does not come with a Tablet Dock, you can use either of the following
methods to perform recovery.
- Hard disk
second partition
- USB CD-ROM
- PCMCIA CD-ROM
Always uses hard
disk second partition as first choice as it does not require any additional
hardware. However, if you does not have a second partition or a Tablet
Dock, you may perform recovery using other methods.
Setup Instructions for using Fujitsu USB CD-ROM/RW drive to perform
recovery from CD
( for model without a Tablet Dock )
Requirements:
i) USB Boot floppy drive
ii) USB keyboard
iii) USB CD-ROM
Since ST4110 only has 2 USB ports, only 2 USB devices can be used
at one time. At initial setup, use your tablet PC navigation key (
to make selection ) and enter button to simulate key press.
PC navigation
key |
enter button |
- Connect
only the USB boot floppy and USB CD-ROM at either ports
- Boot up system
using Tablet PC Recovery boot floppy
- Use navigation
button to select RECOVER USING FUJITSU USB CD-ROM or other USB
CDROM
- Press enter
Button (ent) at your tablet PC when prompted to press Entere)
- Windows installation
continues by copying the filesf)
- Observe when
file copy is going to complete ( at about 95% ), and after copy
finish, unplug USB boot floppy immediately and plug in the USB
keyboard. From there onwards, use the USB keyboard.
If you have an
IR Keyboard
Above step is not necessary if you have an IR keyboard as IR keyboard
does not occupy any USB port.
Using other
third party CD-ROM
If you have other third party CD-ROM, replace your CD-ROM DOS device
driver in the following line in config.sys
DEVICE=A:\USBCDROM\USBCD.SYS
/D:OEMCD001
|
| Recovery Process |
|
|
