After the online warranty registration, I tried to click "Finish" on the message box, in order to remove the registration program. However, there is an error message as below. How can I remove the program?
A2
Please download the patch "Warranty Registration program update" at http://www.pc-ap.fujitsu.com/support/drv_lb_wxp_c12xx.html to remove the error message. (Note: this patch is only applicable for C1212/C1211 with the above error message).
Double click to open the removep.vbs file and complete the installation.
How
do I switch off the power of LifeBook C-3xxx series but it only
switch to Suspend mode?
A4
The LifeBook C-3xxx
series share the same button for Power on and off, Suspend and
Resume switches. To Suspend your machine, press the button once
and release. If your machine is "hung" (do no response to any
keystrokes or mouse actions), while the power indicator is steadily
on, press the button for about 5-6 seconds, release when the
screen turn off.
Note: The machine will automatically switch off, if it is properly
Shutdown in Windows. To properly shutdown in Windows, click
on Start/ Shutdown/ Shutdown
How
do I use the WirelessLink on my LifeBook C-6571?
A6
The WirelessLink is
an infrared device that facilitates communication between two
devices, such as copying files from one computer to another.
You may use this device if the other device has an infrared
port as well.
How
do I disable the SPDIF Connector on my LifeBook C-6572?
A7
The SPDIF Connector is
enabled by hardware configuration and cannot be disabled using
software configuration. The red light should not pose as any
hazard as the system has gone through the required standard
testing. If it causes concern, you may use a sticker or jack
to cover it.
