How
do I install the quick touch application on LifeBook B series?
A1
By default, these four
quick touch application buttons will be configured for the following
applications:
Notepad
Calculator (Not applicable for LifeBook B-2130, B-2150
& B-2174)
Internet Browser
Email
Installing Quick Touch Application
1.
Run setup from the folder
/Touch_Button
2.
"Installing Fujitsu Quick Touch" programme
will be launched, click Next and follow instructions to
install the application.
3.
When the setup has finished, please read
the Software Instruction, "Readme - Notepad" carefully:
Configuring the Quick Touch Applications
4.
To use the Quick Touch Application, first
setup the Quick Touch application Icon from start menu
as shown below.
5.
"(Easy button) configuration" menu will
be launched. The numbered tabs at the top section represent
the respective four quick touch buttons. By default, the
buttons are preset as:
Notepad,
Calculator,
Internet Browser and
Email.
6.
You can reconfigure the 4 buttons by selecting
the numbered tabs which represent the respective buttons.
click on Browse to select the desired application from
your hard drive.
7.
Or alternatively, you can programmed the
button from Start Menu, click on Browse to select the
Applications.
How
do I install the security application on my B-2178 Series LifeBook?
A2
Security Password, Security
Buttons
LifeBook B-2178 Series with Security Panel offers security
function for system boot up and extra hardware security.
The four numeric programmable application launch buttons
can be set as the system boot up password, more than 800,000
sets of password.
NOTE:
To protect the interest of our customer, please note that the
Supervisor password cannot be removed by any means and by end-user.
Fujitsu reserved the right and do not disclose the system security
code. To remove the Supervisor password, kindly send in your
notebook or contact our warranty helpdesk for arrangement, please
note that the service is chargeable.
While
booting up my LifeBook B-2130, the system indicated that the
'WOL558.vxd' file is missing. There has been some problem with
the LAN setting when I downloaded the 'Fujitsu FMV-J185 LAN
Driver for Win9x NT4.00' from the Fujitsu site. I was unable
to install the downloaded 'nic.exe' file. How should I proceed?
Furthermore, my notebook, which runs on Windows 98, hangs completely
when I plug in a PCMCIA CD-ROM driver and boot up the system.
How do I resolve this?
A3
The problem could have
arisen when you removed some applications, which were using
the same file name. Please check your registry file:
Click 'Start' select 'Run', type in 'regedit'.
The 'Registry Editor' will pop-up on the screen.
Select 'Edit' and then select 'Find'.
In the 'Find' dialog, type in 'wol558.vxd' and click on
the 'Find' button.
The 'Registry Editor' will search for this file. If you
can find this file, just delete this line and exit from
this menu.
Finally, restart your system.
As for the PCMCIA CD-ROM, please state the kind of PCMCIA
CD-ROM drive that is being used. Have you re-installed your
OS recently? Make sure the PCMCIA chipset driver is installed
properly.
Where
I can find the signature recognition software for LifeBook B-2548?
A4
There is no signature
recognition software for the B series touch screen. What you
see on the B series catalogue with an inverted document and
a hand signature on the touchscreen simply means that you may
use the touch screen pen to scribble words or signatures on
an inverted "MS Paint" accessories program
activated by using the rotation screen utility preloaded into
the B series LifeBook notebooks. The rotation utility 360-degree
rotation for all displays shown on screen.
